NNX-S382 Custom alloy wheels 18 19inch forged car rims PCD5X114.3 5 hole aluminum alloy car wheels

NNX-S382 21X10 21X11 ET 22 20 P.C.D 5X112 center hole 66.6 2piece forged wheel (custom 18-24inch any date)

Introduction to the difference between casting wheels and forging wheels:

1. Wheel logo: Forging words are generally printed on the forging wheels, but it is not ruled out that some cast wheel prints have the same words. Two pieces and three -piece forging wheels are usually combined through rivets or welding (arc welding). The color of the rim and the spoke bar is obviously different. It is not difficult to see that the casting wheel has no color difference.

2. Details on the back of the wheels: Forging is bright, smooth, and shiny in the front of the wheels. The front of the cast hub may be bright, the back is darker, and there are obvious marks or burrs (but do not rule out the surface of the counterfeiter). Some people with poor workmanship can be seen from the back or small holes. The back of the forging wheels is generally flat, and the casting is stamped.

3. Information about the wheels: Forging wheels are generally located on the inner wall of the wheel (most common) or installation surface. The casting wheels are generally located on the back of the wheel spoke (most common), the back of the wheels, or the installation surface. Generally speaking, wheel information rarely appears in the inner wall of the wheels of the casting wheel. The wheels weigh, the forging wheels are caused by high -intensity forging. Under the same size and style, the forging wheels are lighter. The echo of the knock is to knock on the wheels with a small metal rod.