NNX-S271 19 20 21 22 23 Inch Wholesales Car Wheels Customized Lip Polished Brushed Spokes 5×112/120/114.3/130 Forged Wheel Rims

NNX-S271 20X11 20X12 ET -16 -7 P.C.D 5X115 center hole 71.6 2piece forged wheel (custom 18-24inch any date)

The advantages and disadvantages of large wheel hubs

Although the high-profile large wheels look very sporty and improve the appearance of the vehicle, it is not perfect. It has some advantages and some disadvantages.

Large-sized wheels can provide us with better handling. The larger the wheel, the lower the flat rate, that is, the thinner the tire, the clearer the feedback on the road conditions. And when cornering, due to the large contact area of the tire, it is not easy to deform and the grip is better. This is why many sports cars and racing wheels are very large.

However, the disadvantages brought by large wheels should not be ignored, because for the balance, the wheels are large, the flat rate is low, and the tire tire side is thin, so its ride comfort becomes weakened and the relative fuel consumption will increase, so it is not expensive because of its disadvantages. If you care about economic fuel consumption, you can try to choose a smaller wheel size.

But why is the flat rate often mentioned here so important? Why does the wall of the fetus become thinner after the wheels become larger? The width of the wheels is the distance between the protruding sides of the wheels. The width of the wheels that we usually say is 7J and 8J, the number represents the width of the wheel hub, 7J represents the width of 7 inches, J is the most common type of wheel hub. The width of the wheels determines the width of the tire, so the width of the wheels with different J values also has corresponding standards. Please refer to the table below: