NNX-D1192 Staggered monoblock wheels forged alloy wheels 17 18 19 20 21 22 inch aluminium car rims

NNX-D1192 22X9.5 22X11  ET 30 45 P.C.D 5X112 center hole 66.6 1piece forged wheel (custom 16-24inch any date)

 Alloy wheels

1) Alloy wheels:
Magnesium and aluminum are the ideal light alloy materials that are most suitable for manufacturing wheels.
It has the advantages of many traditional steel wheels, and can meet the needs of high-speed development, energy saving and modernization of the entire vehicle, especially the magnesium alloy has extremely high intensity, fatigue strength, and elastic modulus. It is an ideal material for making wheels. The wheels made of magnesium alloy have excellent shock absorption performance.
a) Advantage:
Metal wheels can make up for the shortcomings of steel wheel hubs, light weight, small inertia resistance, high manufacturing accuracy, and good visual effects.
The deformation is small during high -speed rotation, and the inertia resistance is small, which is conducive to improving the straight line driving performance of the car, reducing tire power, thereby reducing fuel consumption.
The thermal conductivity of the alloy material is about three times that of the steel, and the heat dissipation is good, which plays a certain role in the thermal decline of the vehicle brake system, tires, and braking systems.

b) Disadvantages: The manufacturing process is complex and the cost is high.

2) Aluminum alloy wheels generally use 6061 aluminum alloy and A365.2 aluminum alloy.
a) A) High-quality aluminum alloy products produced by 6061 aluminum alloy meridians and pre-stretching have many metal characteristics, such as excellent cutting processing, excellent welding characteristics and electroplating Differential deformation, dense materials, non-defective, easy to polish, easy to form film, excellent oxidation effect, etc.

Mechanical behavior

The extreme tensile strength of 6061 is 124 MPa, and the tensile yield strength is 55.2 MPA.
The elongation rate is 25.0%
Elasticity coefficient 68.9 GPA
Bending limit strength 228 MPa
Bending yield strength of 103 MPa Po pine ratio 0.330
Fatigue strength is 62.1MPa

3) A356.2 alloy ingots

a) Performance and characteristics:
It has good casting performance such as good liquidity, no thermal cracking tendency, reduced line contraction, good gas tightness, low proportion, good corrosion resistance, and good qi welding. As the wall thickness of the casting increases, the intensity decreases slightly, and the mechanical properties after use of casting are improved. The ingots are densely cut off, without slag and non-metal mixed objects.

• Min.Order Quantity: 4 Piece/Pieces
• Supply Ability: 100000 Piece/Pieces per Month