Factory Outlet Casting 18 Inch Polished 5×114.3 Bi-color aluminum casting car wheels

The processing of aluminum alloy machinery is the product surface obtained from the use of knives for the product. The processing process can be divided into one or two or three times. The lathe is processed one or three times, and the central processing is used. When processing, you should prepare the tools required by the product processing in advance. After confirming the appearance of the cast, there is no large shaking after the clamping. The processing of pine, pinhole, and unpaid processing can be completed.
One processing is first inspected the positioning of the wheels. Machining the setting route to select suitable tools for cutting, and the burrs and wool edges are removed after processing. Then check the appearance to check whether there are defects in the size; the secondary processing is mainly processed on the bolt hole and the air valve hole. It can facilitate inflatable car wheel tires. Through the processing platform, the tilt of the wheels is adjusted at a certain angle, and then checks the secondary processing according to the procedure of the process; the third processing is based on the end of the first processing as the center, and according to the different needs of the product, according to the different needs of the product To set the tools and processing routes and parameters. Then cut the CNC machine tool, and finally check the size and appearance in accordance with the procedures of the process. If the size does not meet the requirements during the inspection, it is necessary to adjust the corresponding position of the corresponding position.